Fiber laser cutting machine can be applied to a variety of materials on the cutting, in the cutting of metal materials has been in a blind area, has changed in recent years, in recent years in the cutting of copper products on the application of gradual promotion.

For the cutting of copper products, many people have a lot of problems with the specific operation and parameter adjustment of the fiber laser cutting machine.

Cutting is not only the use of machine cutting, more need some experience problems, here is to introduce how to cut copper fiber laser cutting machine.

In cutting metal materials need to add auxiliary gas, when the fiber laser cutting machine in cutting metal copper, the added auxiliary gas and material react under high temperature conditions, increase the cutting speed, such as the use of oxygen can achieve the effect of combustion.

Nitrogen for laser cutting machine, is to improve a cutting effect of auxiliary gas, for 1mm below the copper material, the use of fiber laser cutting machine is completely can be processed.

Therefore, when using fiber laser cutting machine, you do not have to worry about whether you can cut off. At this time, you should pay attention to the processing effect, so the best use of nitrogen as an auxiliary gas.

When the thickness of the metal copper reaches 2MM, then nitrogen can not be processed, at this time, oxygen must be added to oxidize it, in order to achieve cutting.

Through the above introduction, we should have a general understanding of how the fiber laser cutting machine should be copper material. In fact, when we cut, we pay attention to not whether the material can be cut, how much to cut in an hour, but the quality of cutting.

Now the production of fiber laser cutting machine is very common, but our company pays more attention to the quality of the operation of the equipment, so the buyer must pay attention to the cutting quality of the cutting machine when buying, and the credibility of the seller.